Cyclone II

The Cyclone II bases are manufactured from 316L stainless steel, giving the cable cleats high creep strength and excellent corrosion resistance. The Cyclone straps are manufactured in 316L stainless steel providing excellent corrosion resistance, and the tensioned straps act as a coil during short circuit conditions to restrain the cable. The Cyclone strap wraps around the angled Cyclone II stainless steel base ensuring the cables are always kept central, the strap is fastened to a stainless steel pin with a hexagon shaped head at one end allowing fast, easy installation via the use of a ratchet, power tool or other suitable mechanical device.

The Cyclone II Strap cable cleats have one M12 and two M10 fixing clearance holes within each base, allowing versatile installation, and enabling the product to be secured to a variety of mounting surfaces. Due to the design of the Cyclone, the cables do not need to be lifted and placed in to the cable cleat, instead the cables are placed on to the bases and the Cyclone straps then wrap around the cables securing them to the mounting surface of the base.

The Cyclone II cable cleats and Cyclone intermediate straps come with Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the Cyclone stainless steel strap and base during normal operation where thermal elongation of cables occurs. The liners also prevent the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications, and protect the cable during short circuit conditions.

The Cyclone Straps are designed to be used as an intermediate restraint (where applicable) between two Cyclone cable cleats to bind cables together giving a cost effective, easy application fixing system. Using the Cyclone II Strap cable cleat and the Cyclone Intermediate Restraints alternatively will dramatically reduce installation time and cost, when compared to alternative cable cleat only solutions.

Third party certification to IEC 61914:2009

316L stainless steel base with stainless steel strap

24 – 145mm in 15 sizes for trefoil formation / application

36 – 118mm in 8 sizes for multicore cables or single core parallel formations

21 – 68mm in 8 sizes for quad formations

Short circuit rating of 151kA peak fault

Operating temperature -50°C to +60°C

Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard

Combined single (M12) and two bolt (M10) base fixing design