Material:
• 1/3: Gland element/Cap nut:
Polyamide PA 6, 25 % glassfiber
reinforced
• 2: ECA-Clamping cage:
Polycarbonate
• 4: Seal: Neoprene
Characteristics:
• PG-/metric thread
• short/long thread
• strain relief through clamping cage
• punchable sealing ring
• Gland has to be mounted with flat
seal and lock nut
Applications:
• for explosion endangered areas
according to EN 50014 and
EN 50019
• machines and devices
• measuring and control engineering
• plant installations
Archives
POLYAMIDE PLUG
Material:
• 1: Plug: Polyamide 6
with glassfiber reinforced
• 2: Flat sealing: Neoprene
Temperature range:
-35°C to 90°C
Colour(s)/Designs:
• black
• External thread: metric
• hexagon with slot
Characteristics:
Certificate: LCIE 03 ATEX 0033 U
Type of protection: Ex e
Test standard: EN 60079-0,
EN 60079-7,
EN 61241-0,
EN 61241-1
Device group: II
Category: 2 and 3
Atmosphere: G / D
Zone: 1, 2, 21, 22
Applications:
• for explosion endangered areas
PORTABLE LIGHT/LED EVA LED EX ZONE 1
Material: Aluminium with low content of copper
IP rating: IP66
Ambient temperature range: -52°C to +60°C
Approvals: INERIS 01ATEX0019X (standard)
TR CU (marking upon request, ordering code to be required)
Marking :II 2 GD
Ex d IIC T(**) Gb
Ex tb IIIC T(**) Db IP66
** T4/135°C, T3/200°C
Gaskets: O-ring made of Nitrile Rubber (NBR)
Surface treatment: Green colour polyurethane painting cycle RAL6003 (other colour available upon request)
Entries: N° 1 entry M25x1,5 complete with brass nickel chrome plated cable gland PAP type
Hardware and screws: AISI304 Stainless steel external hardware and screws
Lamps: Included
Rated operation voltage (UE):230V (standard) 220V, 240V (marking upon request)
Frequency: 50/60 Hz
Accessories included: Protection guard
Brass nickel chrome plated cable gland PAP type complete with set of inner and outer seals
G2X Fluo EX ZONE 2
Material: GRP + 2 gear tray holders in white lacquered steel plate Transparent diffuser in PC with UV protection and high impact resistance
IP: Rating IP66
Operating Temperature: -20°C to +40°C
Standards: EN 60079-0, EN 60079-15, EN 60079-31
Approvals: OBAC 13 CZ/ATEX 0163
Marking: II 3 G Ex-nA IIC T6 Gc II 3 D Ex tc IIIC T85°C Dc IP66
Gaskets: Gasket in polyurethane (to obtain IP66 rating)
Entries: N° 2 entries M20 on each side
Hardware and screws: Fixing springs and closing clips in stainless steel
Lamps: T8 lamps, with power 18W, 36W, 58W, T5, with a power 14W, 24W, 28W, 35W, 49W, 54W, 80W
Ballast: Electronic
Rated operation voltage (UE): 230 V AC/DC 50-60(0)Hz, 110V (by performances)
Frequency: 50-60 Hz
Standard accessories: Polyamide ATEX cable gland M20x1, 5 or M25x1, 5 IP66
Maximum number of terminals: 3×2, 5mm2
Colour: GRP housing in graphite black (RAL 9011), gray (RAL 7035), yellow (RAL 1003)
Options: Emergency kit 1h or 3h
Note: Impact resistance IK08
RTES Under Insulation End Seal Kit
RTES
Under Insulation End Seal Kit
*Use With SRL, SRP, SRM/E, CWM, SRF, HWM
Stainless Steel Hardware
*1” Wide Strapping Channel for Secure Mounting
*Third-party certifications: UL Listed, CSA, FM, ATEX
SRME (Self Regulating Medium Temp.)
Self-Regulating Medium Temperature
Approximate Size 3/8″W x 1/8″H
Available in 5, 8, 10, 15, 20 Watts per Foot
Available in 120 and 208-277V models
Third-party certifications: ATEX, CSA, FM, GOST, ICECx, UL
Maximum Continuous Exposure Temp, Power Off, 425°F (215°C)
Circuit Lengths to 750 feet
T-Ratings – See data sheet
Min. Install Temp = -76°F (-60°C)
Min. Bend Radius 1-1/8″
For Use on Metal Pipes & Tanks
UL approved for freeze protection of fire protection system piping
FLUORESCENT LIGHT/LED RMS-560 SERIES ZONE 1
Material: GRP + 2 gear tray holders in white lacquered steel plate Transparent diffuser in PC with UV protection
IP: Rating IP66
Operating Temperature: From -20°C to +40°C
Standards: EN 60079-0, EN 60079-15, EN 60079-31
Approvals: OBAC 13 CZ/ATEX 0163
Marking: II 3 G Ex-nA IIC T6 Gc II 3 D Ex tc IIIC T85°C Dc IP66
Gaskets: Gasket in polyurethane (to obtain IP66 rating)
Entries: N° 2 entries M20 on each side
Hardware and screws: Fixing springs and closing clips in stainless steel
Lamps: LED lamps
Ballast: Electronic
Rated operation voltage (UE): 230 V AC/DC 50-60(0)Hz, 110V (by performances)
Frequency:50-60 Hz
Standard: accessories Polyamide ATEX cable gland M20x1,5 or M25x1,5 IP66
Maximum number of terminals: 3×2,5mm2
Colour: GRP housing in graphite black ( RAL 9011) , gray (RAL 7035) , yellow (RAL 1003)
Options: Emergency kit 3h
Note: Impact resistance IK08
FLOODLIGHT/LED LED FL SERIES EX ZONE 1
Material: Aluminium with low content of copper
Stainless steel AISI316L (ordering codes upon request)
IP: Rating IP65
Ambient temperature: -50°C to +55°C
Approvals: INERIS 00ATEX0023X (standard)
GOST R (marking upon request, ordering code to be required)
IEC Ex IN PROGRESS
Marking:II 2 GD Ex-de IIB+H2 T3 Gb Ex-tb IIIC T200°C Db IP65
Gaskets: Gasket made of Nitrile Rubber (NBR) on flat joint
Surface treatment Painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
Internal anticondensate painting
AISI316L version unpainted
Entries: N° 2 entries M25x1,5
Hardware and screws: AISI316L Stainless steel screws and AISI304 Stainless steel adjustable bracket
Lamps Included
Rated operation voltage (UE): See datasheet
Frequency: See datasheet
Power factor: > 0,95
Accessories: N° 1 brass nickel chrome plated plug + N° 1 brass nickel chrome plated cable gland PNA type c/w set of inner seals
Accessories available upon request: Protection guard (not to be sold separately unless as a spare part)
SRP (Self Regulating Process Temp.)
Self-Regulating Process Temperature
Self- Regulating, Energy Efficient
16 AWG Buss Wire
Circuit Lengths to 750 ft.
Process Temperature Maintenance to 230°F (110°C)
Maximum Continuous Exposure Temperature, Power Off, 275°F (135°C)
Available in 5, 10, and 15 Watts per Foot
120 and 208-277 Volts Available from Stock
Industrial Process Maintenance Applications
Approximate Size 3/8”W x 1/8”H
Min. Bend Radius 1-1/8”
For use on Metallic Pipes
Consult Factory for use on Plastic Piping