Enclosure: GRP body with clear polycarbonate diffuser and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries (two at each end)
Termination: 4 core 4mm² sq max conductors with looping and 16A rating through wiring
Installation: Two M8 brass inserts on rear of body
Control Gear: High frequency ballast & invertor c/w battery pack
[br]Copper/iron ballast c/w battery pack as option on 36W
Relamping: Via quick-release diffuser clamp and hinged diffuser
Burning Position: Universal
Ingress Protection: IP66/67 to EN60529
Electrical Supply: 220-240V 50/60Hz
(Always state V/Hz when ordering)
Battery: Ni-Cd (6V 4Ah)
Duration: 3 Hours
Emergency Output: 32% of one lamp (18W) 14% of one lamp (36W)
Archives
800 Series Stainless Steel EX ZONE 2
Type of Protection: Ex nR (Restricted Breathing)
Area Classification: Zone 2 areas
ATEX Classification: Group II Category 3 GD
ATEX: Type Examination Certificate BAS98ATEX3378
Coding: Ex II 3 GD Ex nR II (refer to datasheet for T rating and Ambient)
Enclosure: Marine grade 316S31 stainless steel body
(Painted RAL-9005 semi gloss smooth textured – 864 version only) with toughened glass window, silicone rubber gasket
Reflector/Geartray: Wide beam high purity anodised aluminium
Entry: 2 x M20 cable entries
Termination: 3 core 6mm² max. conductor with looping
Installation: Stirrup mounting
Lampholder: E40 or E27
Lamp Type: High Pressure Sodium, Metal Halide or Single Ended Tungsten Halogen
Control Gear: Internal copper and iron ballast with ignitor and PFC correction capacitors
Relamping: Access via front glass cover assembly secured by quick release stainless steel clips
Burning Position: Control gear mounted below lamp
Ingress Protection: IP66/67 to EN 60529
Electrical Supply: 220V, 230V, 240V, 254V 50Hz
Protecta Industrial IND
Enclosure: GRP body with clear polycarbonate diffuser and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries (two at each end)
Termination: 3 core 4mm² max conductors with looping and 16A rating through wiring
Installation: Two M8 brass inserts on rear of body
Control Gear: Switch start copper/iron control gear and PFC capacito
Relamping: Via quick-release diffuser clamp and hinged diffuser
Ingress Protection: IP66/67 to EN60529
Electrical Supply: 110-240V 50/60Hz (Always state V/Hz when ordering)
238 LED Well-Glass EX ZONE 1
Type of Protection Ex d e (Flameproof, Increased safety) Ex tb (Dust Protected Enclosure)
Area Classification Zone 1 and Zone 21 areas
ATEX Classification Group II Category 2 GD
IECEx IECEx Certificate of Conformity IECExBAS16.0019X
ATEX EC Type Examination Certificate BAS08ATEX0177
Coding Ex db eb op is IIB T5 Gb Ex op is tb IIIC T100°C Db IP6X
Enclosure Aluminium Alloy LM6 to BS 1490 (AC44100) All fastenings A4 stainless steel Toughened glass dome globe
Entry 2 x M20 cable entries
Termination 3 core 6mm² max. conductor with looping
Installation Flush mounting bracket
Ingress Protection IP66 to EN 60529
Electrical Supply 120-277V AC 50/60Hz
238 Well-Glass EX ZONE 1
Type of Protection: Ex d e (Flameproof Increased Safety)
Area Classification: Zone 1 and Zone 2 areas
ATEX Classification: Group II Category 2 GD
IECEx: IECExBAS08.0056
ATEX: EC Type Examination Certificate BAS08ATEX0177
Coding: Ex II 2 GD Ex d e IIB (refer to datasheet for T rating and Ambient)
Enclosure:
Aluminium alloy LM6 to BS 1490 (AC44100).
All fastenings A4 stainless steel.
Toughened glass dome globe.
Reflector/Geartray: High purity anodised aluminium
Entry: 2 x M20 cable entries
Termination: 3 core 6mm² max. conductor with looping
Installation: Flush mounting bracket
Lampholder: E27 or E40
Lamp Type: HPS, Metal Halide, Mercury Vapour, GLS, QL or MBTF
Control Gear: Internal copper/iron with PFC correction capacitor
Relamping: Access via front glass cover assembly
Burning Position: Universal
Ingress Protection: IP66/67
Electrical Supply:
220V, 230V, 240V, 254V 50Hz – 70W, 150W & 250W – HPS/Metal Halide
220V, 230V, 240V 50Hz – 80W, 125W & 250W – MBF/U
100W HPS 250V Max – GLS/MBTF
ScotiaEx LED EX ZONE 1
Type of Protection: Ex d e (Flameproof, Increased Safety) Ex tb (Dust Protected Enclosure)
Area Classification: Zone 1 and Zone 21 areas to EN60079-10-1 and EN 60079-10-2 with installation to EN 60079-141 Gas Groups IIA, IIB and H2
ATEX Classification: Group II Category 2 GD
Coding: Ex d e IIB (+ H2 option) T* GB Ex tb IIIC T** °C Db IP6X
Refer to table for T rating and Ambient
Enclosure: Aluminium Alloy LM6
Entry: 2 X M20 Cable Entries
Termination: 3 core 6mm² max. conductor with looping
Installation: Stirrup mounting bracket
Control Gear: Electronic Driver
Ingress Protection: IP66
Electrical Supply: 120-277V AC 50/ 60Hz
Protecta III Emergency EX ZONE 1
Type of Protection: Ex e mb q (Increased safety Encapsulation Powder filling)
Area Classification: Zone 1 and Zone 21
ATEX Classification: Group II Category 2 GD
IECEx: IECEx ITS 03.0005
ATEX: EC Type Examination Certificate Baseefa04ATEX0220
Coding: Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C
Enclosure: GRP body with polycarbonate cover and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries, two at each end
Termination: Quick release terminals – 4 core 4mm² max. conductor with looping and 16A rating through wiring (6mm² terminations available, contact sales)
Installation: Two M8 tapped brass inserts located on rear of body
Lampholder: G13 (Bi-pin)
Lamp Type: T8 tubular fluorescent
Control Gear: High Frequency (EOL)
Relamping: Quick release diffuser clamps and hinged cover
Burning Position: Universal
Ingress Protection: IP66/IP67 to EN 60529 and deluge tested to DTS-01
Electrical Supply: 220V-254V 50/60Hz,
Battery: Internal Ni-Cd Battery (6V 4 Ah)
Duration: 90 minutes to EN60598-2-22 (as standard)
3 hour option available, contact sales
Emergency Output: 50% of one lamp (18W)
25% of one lamp (36W), 45% HEO Option
Protecta III EX ZONE 1
Type of Protection: Ex e mb q (Increased safety Encapsulation Powder filling)
Area Classification: Zone 1 and Zone 21
ATEX Classification: Group II Category 2 GD
IECEx: IECEx ITS 03.0005
ATEX: EC Type Examination Certificate Baseefa04ATEX0220
Coding: Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C
Enclosure: GRP body with polycarbonate cover and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries, 2 at each end
Termination: Quick release teminals – 3 core 4mm² max. conductor with looping and 16A rating through wiring (6mm² terminations available, contact sales)
Installation: Two M8 tapped brass inserts located on rear of body
Lampholder: G13 (Bi-pin)
Lamp Type: T8 tubular fluorescent
Control Gear: High Frequency
Relamping: Quick release diffuser clamps and hinged cover
Burning Position: Universal
Ingress Protection: IP66/67 to EN 60529 and deluge tested to DTS-01
Electrical Supply: 220V-254V 50/60Hz
220V – 300V dc
IEC 309 HP
Product Description & Specifications:
Features of the range include –
• The Gewiss range of IEC 309 industrial switches and plug sets are the international standard when connecting electrical components
• in an industrial application
• From 16 to 125A
• Durable covers with spring shut operation
• IP67
Range includes –
• Plugs from 16 to 125A in 240 and 415VAC in straight and angled configuration
• Appliance inlets from 16 to 125A in 240 and 415VAC
• Cord connectors
• Flush and surface sockets
• Refer plugs and sockets to suit refrigerated containers with specific earth connection
• Switched surface sockets from 16 to 125A in 240 and 415VAC