Enclosure: GRP body with clear polycarbonate diffuser and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries (two at each end)
Termination: 3 core 4mm² max conductors with looping and 16A rating through wiring
Installation: Two M8 brass inserts on rear of body
Control Gear: Switch start copper/iron control gear and PFC capacito
Relamping: Via quick-release diffuser clamp and hinged diffuser
Ingress Protection: IP66/67 to EN60529
Electrical Supply: 110-240V 50/60Hz (Always state V/Hz when ordering)
Archives
238 LED Well-Glass EX ZONE 1
Type of Protection Ex d e (Flameproof, Increased safety) Ex tb (Dust Protected Enclosure)
Area Classification Zone 1 and Zone 21 areas
ATEX Classification Group II Category 2 GD
IECEx IECEx Certificate of Conformity IECExBAS16.0019X
ATEX EC Type Examination Certificate BAS08ATEX0177
Coding Ex db eb op is IIB T5 Gb Ex op is tb IIIC T100°C Db IP6X
Enclosure Aluminium Alloy LM6 to BS 1490 (AC44100) All fastenings A4 stainless steel Toughened glass dome globe
Entry 2 x M20 cable entries
Termination 3 core 6mm² max. conductor with looping
Installation Flush mounting bracket
Ingress Protection IP66 to EN 60529
Electrical Supply 120-277V AC 50/60Hz
238 Well-Glass EX ZONE 1
Type of Protection: Ex d e (Flameproof Increased Safety)
Area Classification: Zone 1 and Zone 2 areas
ATEX Classification: Group II Category 2 GD
IECEx: IECExBAS08.0056
ATEX: EC Type Examination Certificate BAS08ATEX0177
Coding: Ex II 2 GD Ex d e IIB (refer to datasheet for T rating and Ambient)
Enclosure:
Aluminium alloy LM6 to BS 1490 (AC44100).
All fastenings A4 stainless steel.
Toughened glass dome globe.
Reflector/Geartray: High purity anodised aluminium
Entry: 2 x M20 cable entries
Termination: 3 core 6mm² max. conductor with looping
Installation: Flush mounting bracket
Lampholder: E27 or E40
Lamp Type: HPS, Metal Halide, Mercury Vapour, GLS, QL or MBTF
Control Gear: Internal copper/iron with PFC correction capacitor
Relamping: Access via front glass cover assembly
Burning Position: Universal
Ingress Protection: IP66/67
Electrical Supply:
220V, 230V, 240V, 254V 50Hz – 70W, 150W & 250W – HPS/Metal Halide
220V, 230V, 240V 50Hz – 80W, 125W & 250W – MBF/U
100W HPS 250V Max – GLS/MBTF
ScotiaEx LED EX ZONE 1
Type of Protection: Ex d e (Flameproof, Increased Safety) Ex tb (Dust Protected Enclosure)
Area Classification: Zone 1 and Zone 21 areas to EN60079-10-1 and EN 60079-10-2 with installation to EN 60079-141 Gas Groups IIA, IIB and H2
ATEX Classification: Group II Category 2 GD
Coding: Ex d e IIB (+ H2 option) T* GB Ex tb IIIC T** °C Db IP6X
Refer to table for T rating and Ambient
Enclosure: Aluminium Alloy LM6
Entry: 2 X M20 Cable Entries
Termination: 3 core 6mm² max. conductor with looping
Installation: Stirrup mounting bracket
Control Gear: Electronic Driver
Ingress Protection: IP66
Electrical Supply: 120-277V AC 50/ 60Hz
Protecta III Emergency EX ZONE 1
Type of Protection: Ex e mb q (Increased safety Encapsulation Powder filling)
Area Classification: Zone 1 and Zone 21
ATEX Classification: Group II Category 2 GD
IECEx: IECEx ITS 03.0005
ATEX: EC Type Examination Certificate Baseefa04ATEX0220
Coding: Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C
Enclosure: GRP body with polycarbonate cover and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries, two at each end
Termination: Quick release terminals – 4 core 4mm² max. conductor with looping and 16A rating through wiring (6mm² terminations available, contact sales)
Installation: Two M8 tapped brass inserts located on rear of body
Lampholder: G13 (Bi-pin)
Lamp Type: T8 tubular fluorescent
Control Gear: High Frequency (EOL)
Relamping: Quick release diffuser clamps and hinged cover
Burning Position: Universal
Ingress Protection: IP66/IP67 to EN 60529 and deluge tested to DTS-01
Electrical Supply: 220V-254V 50/60Hz,
Battery: Internal Ni-Cd Battery (6V 4 Ah)
Duration: 90 minutes to EN60598-2-22 (as standard)
3 hour option available, contact sales
Emergency Output: 50% of one lamp (18W)
25% of one lamp (36W), 45% HEO Option
Protecta III EX ZONE 1
Type of Protection: Ex e mb q (Increased safety Encapsulation Powder filling)
Area Classification: Zone 1 and Zone 21
ATEX Classification: Group II Category 2 GD
IECEx: IECEx ITS 03.0005
ATEX: EC Type Examination Certificate Baseefa04ATEX0220
Coding: Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C
Enclosure: GRP body with polycarbonate cover and brass suspension points
Reflector/Geartray: White polyester painted zinc coated steel
Entry: 4 x M20 cable entries, 2 at each end
Termination: Quick release teminals – 3 core 4mm² max. conductor with looping and 16A rating through wiring (6mm² terminations available, contact sales)
Installation: Two M8 tapped brass inserts located on rear of body
Lampholder: G13 (Bi-pin)
Lamp Type: T8 tubular fluorescent
Control Gear: High Frequency
Relamping: Quick release diffuser clamps and hinged cover
Burning Position: Universal
Ingress Protection: IP66/67 to EN 60529 and deluge tested to DTS-01
Electrical Supply: 220V-254V 50/60Hz
220V – 300V dc
IEC 309 HP
Product Description & Specifications:
Features of the range include –
• The Gewiss range of IEC 309 industrial switches and plug sets are the international standard when connecting electrical components
• in an industrial application
• From 16 to 125A
• Durable covers with spring shut operation
• IP67
Range includes –
• Plugs from 16 to 125A in 240 and 415VAC in straight and angled configuration
• Appliance inlets from 16 to 125A in 240 and 415VAC
• Cord connectors
• Flush and surface sockets
• Refer plugs and sockets to suit refrigerated containers with specific earth connection
• Switched surface sockets from 16 to 125A in 240 and 415VAC
SMART 4 RANGE OF LED LIGHTING
Smart [4] – LB is a new-generation modular LED device that enables the creation of a modular lighting system that replaces traditional watertight luminaires in applications such as warehouses, plants, workshops and underground car parks with relatively low installation heights.
Smart [4] LB: ceiling-mounting luminaire: technopolymer frame; die-cast aluminium dissipator with a low copper content; galvanised iron fixing plate; fixing spring in pre-stressed steel wire; IP66 and IK08 degree of protection; Glow Wire 850°. Available in versions with 2 LED, 2+2 LED, 4 or 5 LED and with four types of optics: diffused 100°, average 60° restricted 30° and elliptical. Smart [4] – LB is available in the versions complete with electronic emergency devices and can be managed with the DALI and DALI READY interfaces.
SMART 3 RANGE OF LED LIGHTING
Smart [3] is the new range of watertight LED luminaires that completes the Smart [4] Range. Specially designed with compact dimensions of the latest generation of LED lamps, Smart [3] guarantees reductions in energy consumption of over 50%.The opal or transparent diffuser with its longitudinal prismatic finish makes Smart [3] the perfect solution not only for industrial but also in food-related environments. Versions with continuous wiring connections allow the installation of a seamless line of luminaires simply by using the clip-adapter supplied with the product. Thanks to the choice of materials and its design, this new range of luminaires guarantees excellent resistance to shocks, accidental impact, water jets, damp, foreign bodies and dust.