Based on the DPJB range, the SX125 provides a unique solution for the termination of offshore umbilical cables or onshore distribution systems.
The power conductor compartment provides the facility to connect up to 24 power conductors up to 11kV. A separate control compartment is used for terminating fibre optic or control cables. This allows the installer to work on optical fibres or control conductors without isolating HV supply
Each compartment independently IP166.
Archives
Busbar Box (11kv)
This 11kV busbar enclosure is designed to safely carry high voltage supplies with extreme current loadings in Zone 1 hazardous areas.
Certified to carry a maximum current of 3200A, the busbar box is suitable for connectors over 400mm sq, the enclosure is capable of connecting three phases plus neutral and up to six conductors per phase. It also features a 80kA for one second fault rating.
The busbar box is fully ATEX and IECEx compliant for Zone 1 and 2 Gas and Dust environments. It is also Class I, Division 2 and InMetro certified.
The IP66/67 enclosure is also DTS-01 deluge and Type 4X tested.
HVJB Range (11kv)
The latest in the high voltage range offering enhanced flexibility over the choice of cables, entries and cable terminations. The HVJB can accept up to 4 phase connections either straight through or bottom entry only. The unit can accommodate up to three connectors per phase.
The HVJB range is suitable for up to 11kV and 980A and features a 45kA for 0.2 second fault rating.
The HVJB is fully ATEX and IECEx compliant, suitable for Zone 1 & 2 Gas and Dust environments. The range is also Class I Division 2 and GOST-R certified. There is also a 15kV restricted breathing option (ATEX only).
The standard HVJB enclosure is manufactured from 316L stainless steel (EN 1.4404) with a silicon gasket and stainless steel fasteners. The enclosure also features heavy duty machined hinges with lift off cover pad-lockable cover. It has an orbital finish but painted and electro-polished options also available.
The IP66/67 enclosure is also DTS-01 deluge and Type 4X tested. Its wide ambient range also makes it ideally suited for low temperature applications.
DPJB Range (11kv)
The DPJB range was designed to provide a safe solution for the connection of down hole pumps to offshore installations. It provides phase segregation as standard and is fault rated to 50kA for one second.
Manufactured from 316L stainless, the DPJB can be configured as through box or with in/out connectors at same end.
The DPJB is suitable for high voltage applications up to a maximum of 11kV and is fully ATEX compliant.
MJB Range (8.3kv)
The MJB range provides a simple, low cost but effective solution for the connection of high voltage cables. Its design allows 180 degree in/out cabling and is used primarily for jointing cables or as a connection box.
The MJB is suitable for up to 4 phase connections (top & bottom) and a maximum of 8.3kV.
The standard enclosure is manufactured from 316L stainless steel (EN 1.4404) with a silicon gasket and stainless steel fasteners. The MJB also features heavy duty machined hinges with lift off cover pad-lockable cover. It has an orbital finish but painted and electro-polished options also available.
The IP66/67 enclosure is also DTS-01 deluge and Type 4X tested. Its wide ambient range also makes it ideally suited for low temperature applications.
LR Range (3.3kv)
The LR (left/right) Box is designed to allow supply cable to enter and exit at 900 from each other.
Supplied complete with three glands plates, its unique design can be modified by the installer to allow either left hand or right hand cable connections. This allows on site configure to suit installation orientation.
The LR box is fully ATEX compliant for Zone 1 Gas and Dust environments. It is suitable for voltages up to 3.3kV and can accommodate an overload current 1845A for ten seconds.
The standard enclosure is manufactured from 316L stainless steel (EN 1.4404) with a silicon gasket and stainless steel fasteners. The LR also features heavy duty machined hinges with lift off cover pad-lockable cover. It has an orbital finish but painted and electro-polished options also available.
The IP66/67 enclosure is also DTS-01 deluge and Type 4X tested.
Emergency Stop Mushroom Push Buttons
The Harmatex components range features large push button selection, with a choice of momentary or push-push actuation modes; pilot lamps and selector switches, with plastic or metal bezel.
Harmatex range offers unrivalled flexibility with a modular design accomodating up to 6 contacts per operator head.
Material Metal and plastic
IP Rating IP66
Ambient temperature range -20°C to +65°C
Approvals INERIS 02 ATEX 9007U
Marking II 2 GD
Ex d e IIC Gb (contact blocks)
Ex tb IIIC Db
Selector Switches With Standard/Long Handle
The Harmatex components range features large push button selection, with a choice of momentary or push-push actuation modes; pilot lamps and selector switches, with plastic or metal bezel.
Harmatex range offers unrivalled flexibility with a modular design accomodating up to 6 contacts per operator head.
Material Metal and plastic
IP Rating IP66
Ambient temperature range -20°C to +65°C
Approvals INERIS 02 ATEX 9007U
Marking II 2 GD
Ex d e IIC Gb (contact blocks)
Ex tb IIIC Db
Cyclone I
The Cyclone I bases are manufactured from 5000 series aluminium, making the base lightweight, easy to handle and corrosion resistant. The Cyclone straps are manufactured in 316L stainless steel, providing excellent corrosion resistance, and the tensioned straps act as a coil during short circuit conditions to restrain the cable. The Cyclone strap wraps around the angled Cyclone I aluminium base ensuring the cables are always kept central. The strap is fastened to a stainless steel pin with a hexagon shaped head at one end allowing fast, easy installation via the use of a ratchet, power tool or other suitable mechanical device.
The Cyclone I Aluminium Strap cable cleat has one M12 and two M10 fixing clearance holes within each base, allowing versatile installation and enabling the product to be secured to a variety of mounting surfaces. Due to the design of the Cyclone, the cables do not need to be lifted and placed in to the cable cleat, instead the cables are placed on to the Cyclone bases and the Cyclone straps then wrap around the cables securing them to the mounting surface of the Cyclone base.
The Cyclone I Cable Cleats and Cyclone intermediate straps come with Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the Cyclone stainless steel strap and base during normal operation where thermal elongation of cables occurs. The liners also prevent the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications, and protect the cable during short circuit conditions.
The Cyclone Strap is designed to be used as an intermediate restraint (where applicable) between two Cyclone cable cleats to bind cables together giving a cost effective, easy application fixing system. Using the Cyclone I Strap cable cleat and the Cyclone Intermediate Restraint alternatively will dramatically reduce installation time and cost, when compared to alternative cable cleat only solutions.
- Third party certification to IEC 61914:2009
- Lightweight aluminium base with 316L stainless steel strap
- 24 – 145mm in 15 sizes for trefoil formation / application
- 36 – 118mm in 8 sizes for multicore cables or single core parallel formations
- 21 – 68mm in 8 sizes for quad formations
- Short circuit rating of 124kA peak fault
- Operating temperature -50°C to +60°C
- Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard
- Combined single (M12) and two bolt (M10) base fixing design