Sapphire

The Sapphire cable cleat is available for single parallel formation and for diameters of 26 to 150mm in 12 sizes and is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

With one M12 and two M10 fixing clearance holes within its base, the Sapphire range allows versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.

The Sapphire cable cleats come with liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cables in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.

Third party certification to IEC 61914:2009
316L stainless steel
26 to 150mm in 12 sizes for single / parallel formation
Operating temperature -50°C to +60°C
Standard liners which are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
Combined single (M12) and two bolt (M10) fixing design