The Conqueror cable cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.
Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners are standard helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cables in the event of short circuit fault conditions.
Third party certification to IEC 61914:2009
316L stainless steel
19 – 130mm in 16 sizes for trefoil formation / application
Short circuit rating of 170kA peak fault
Operating temperature -50°C to +60°C
Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners as standard
Combined single (M12) and two bolt (M10) fixing design
The Sapphire cable cleat is available for single parallel formation and for diameters of 26 to 150mm in 12 sizes and is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.
With one M12 and two M10 fixing clearance holes within its base, the Sapphire range allows versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.
The Sapphire cable cleats come with liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cables in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.
Third party certification to IEC 61914:2009
316L stainless steel
26 to 150mm in 12 sizes for single / parallel formation
Operating temperature -50°C to +60°C
Standard liners which are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
Combined single (M12) and two bolt (M10) fixing design
The CMP Products Sabre One Bolt single cable cleat is a non-metallic cable cleat which has been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914:2009). It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from various materials making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral cable movement. The Sabre One Bolt cable cleat is available in ten sizes suitable for cable diameters of 10mm up to 57mm. This cable cleat has an M10 clearance hole for securing it to a mounting surface.
Third party certification to IEC 61914:2009
Available in Nylon, Low Smoke & Fume (LSF) V0 Nylon & LUL approved polymer
Sunlight (UV) & weather resistant
Operating temperature -40°C to +60°C
10 – 57mm in 10 sizes
Excellent axial & lateral load retention
Single bolt fixing design
Double Seal Industrial Cable Gland
• Metal-to-metal armour clamping
• Direct & remote installation
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Displacement type inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Designed to prevent Coldflow
• Deluge protection option
• -60˚C to +130˚C (standard), -20˚C to 200˚C (ThermIn option available)
• EMC tested
Single Seal Industrial Cable Gland
• High quality durable materials
• Robust, heavy duty design
• Metal-to-metal armour clamping
• Direct & remote installation
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60˚C to +130˚C (standard), -20˚C to 200˚C (ThermIn option CXHT)
• Deluge protection option
• EMC tested
Single Seal Industrial Cable Gland
• High quality durable materials
• Robust, heavy duty design
• Metal-to-metal armour clamping
• Direct & remote installation
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60˚C to +130˚C (standard), -20˚C to 200˚C (ThermIn option CWHT)
• Deluge protection option
• EMC tested
Note: Deluge Proof option available (CWD)
Apparatus Type: Flameproof Enclosure Range
Ingress Protection: IP66 to EN60529
Material: 316 Stainless Steel enclosure, cover & hinges complete with 316 Stainless Steel fasteners
Mounting Plate: 316 Stainless Steel
Components: Switches, Breakers, RCD units, Indicator lamps, motor controllers, etc.
Voltage Rating: Up to 24kV ac or 1500V dc
Cable Entry: Variable Metric or NPT entry combinations on any of the 4 sides
Mounting: Via rear mounting lugs (see dimensional data overleaf)
Certification
Area Classification:
Group IIB Category 2 GD (Zone 1/21 and 2/22),
Option: Group IIB+ H2 Category 2 GD (Zone 1/21 and 2/22)
Type of Protection: Ex db (Flameproof), Ex tb (Dust), Ex db [ia/ib] (Intrinsically Safe)*
Apparatus Coding:
Ex db IIB or IIB+H2 T* Gb, Ex tb* IIIC T* °C Db
Ex db [ia Ga] IIB or IIB+H2 T6 Gb, Ex tb [ia Da] IIIC T85 °C Db
Ex db [ib Gb] IIB or IIB+H2 T6 Gb, Ex tb [ib Db] IIIC T85 °C Db
Ambient Temperature: -20°C ≤ Tamb ≤ 40°C (with options for +45°C, +50°C, +55°C and +60°C)
Certificate Number: INERIS 13ATEX0019X / IECEx INE14.0061X
Type of Protection: Ex nA nR(Non Sparking Restricted Breathing)
AR 2 T* ºC (Tamb = -30ºC to +*ºC)
DIP A22 T* (Tamb = -30ºC to +*ºC)
* – refer to IEC Ex certificate
Area Classification: Zone 2 areas
ATEX Classification: Group II Category 3 G
IECEx: IECEx BAS 05.0053X
ATEX: Type Examination Certificate Baseefa04ATEX0393X
Coding: Ex II 3 G Ex nA nR II
Enclosure: Painted aluminium body with glass globe. Silicone rubber gasket. Single stainless steel barrel nut fastener.
Entry: Ceiling mounted: 4 x M20 cable entries
Wall mounted (/WM): 2 x M20 & 2 x M25 cable entries
Pendant mounted (/PE): 1 x M25 pendant cable entry & 4 x M20 cable entries
Termination: 3 core 6mm² max with looping.
Installation: Ceiling, stanchion, wall or pendant mounting
Lampholder: E27 or E40
Lamp Type: HPS, Metal Halide or Mercury Vapour
Control Gear: Internal copper/iron ballast with ignitor and[br]PFC correction capacitors
Relamping: Access via restricted breathing lamp chamber
Burning Position: Up to 25° off vertical
Ingress Protection: IP66
Electrical Supply:
20, 230, 240V 50Hz (50, 80, 100 & 125W)
220, 230, 240, 254V 50Hz (70, 150, 250 & 400W)
Single Seal Industrial Cable Gland
• High quality durable materials
• Robust, heavy duty design
• Displacement type seal
• Deluge protected
• -60˚C to +130˚C (standard), -20˚C to 200˚C
